To enhance the strength and adhesion of the silicone, you could consider the following options: 1. Use a Different Silicone Formulation: Some types of silicone are specifically designed for enhanced strength and adhesion. You might want to research and choose a product that meets your specific needs. 2. Surface Preparation: Ensure the surface to which the silicone is applied is clean, dry, and free of any dust or debris. This can significantly improve adhesion. 3. Use a Primer: Certain primers can be used to improve the adhesion of silicone to various surfaces. 4. Incorporate Additives: Some additives can enhance the properties of silicone, including its strength and adhesion. However, this usually requires a good understanding of the material science involved and may not be practical for everyday applications. 5. Curing Conditions: The conditions under which silicone cures can impact its final properties. For example, curing the silicone in an environment with controlled temperature and humidity can result in a stronger, more adhesive product. Remember, safety should be your priority when handling materials and chemicals. Always follow the manufacturer’s instructions and safety guidelines.

If you are just beginning to work with synthetic resins, you may be put off by the somewhat high prices of many synthetic resin components. Nevertheless, you should not look for the cheapest offers. There is a possibility that particularly cheap products are of inferior quality, which can also be seen in the result of your work and may demotivate you. In addition, some products may also contain solvents that are harmful to health or evaporate during the curing process. This can lead to the material not curing completely or being difficult to mix before. Some of the cheap epoxies also do not have a crystal-clear transparency but appear slightly yellowish during processing. This yellowish tinge can be intensified later by a little sunlight. In conclusion, Even after a meaningful price comparison, you should buy the highest quality resin components possible, so that you can work well and achieve satisfactory results. To buy a high quality epoxy resin with a reasonable price, we are your best choice. Clear Epoxy resin for deep casting https://www.wix.app/bookings/2b312941-e6f6-4c72-b331-4a6b01573af7/service/79d19a6f-179d-4799-848c-14b2c5780b97/details?d=https://www.unisil.net/service-page/clear-epoxy-resin-for-deep-casting-1

UniSil offer liquid silicone for molding, which includes several product series. They are: 1. RTV-2 Tin cure silicone Pouring molding type (Light viscosity): T-M series Brushing molding type (vertical stick high viscosity): T-MB series 2. RTV-2 Platinum cure silicone Translucent type (very light viscosity): P-M series Transparent type (Medium high viscosity): P-MT series Below table is the detailed comparison of UniSil different types of molding series silicone: